Disinfection by-products: Difference between revisions

From Opasnet
Jump to navigation Jump to search
(Created page with "Category:IEHIAS Category:Exposure Category:Biomarker :''The text on this page is taken from an equivalent page of the IEHIAS-project. *Trihalometh...")
 
mNo edit summary
 
Line 60: Line 60:


Children, frequent swimmers and occupationally exposed persons generally have higher risk of exposure
Children, frequent swimmers and occupationally exposed persons generally have higher risk of exposure
==See also==
{{IEHIAS}}

Latest revision as of 19:08, 25 September 2014

The text on this page is taken from an equivalent page of the IEHIAS-project.
  • Trihalomethanes (THMs) and trichloroacetic acid (TCAA) may be used to measure human exposure to drinking water disinfection by-products.
  • DBPs are formed through reactions between residual chlorine (and other halogen compounds) and natural organic materials such as fulvic and humic acids.
  • THMs are volatile, while HAAs are classifies as non-volatile.

Disinfection by-products as biomarkers

Sample collection and storage

Matrix:

Most efforts have been concentrated on measuring THMs in blood and exhaled breath and HAAs in urine.

Kinetics:

  • Uptake routes include ingestion, inhalation and dermal absorption.
  • Contributions of different exposure routes to total uptake depends on which DBP is monitored.
  • Generally HAAs are mainly taken up through drinking water
  • THM uptake is through inhalation or ingestion from water.
  • THMs have very short biological half-lives, only measurable in minutes following exposure.
  • HAAs have longer biological half-lives, integrating exposure over several days.

Sampling conditions:

Blood and urine samples are gathered and stored using standard procedures. Exhaled alveolar air can be sampled in valved glass tubes, steel canisters or Tedlar air sampling bags

Sample measurement

Analytical aspects:

  • Most methods combine gas chromatography and mass spectrometry techniques.
  • Detection limits depend on the method, matrix and compound measured.
  • General ranges of detection limit for DBPs in blood are < 1 pg/l - 0,1 mg/l (THMs) and > 1 ng/l (TCAA), 0,3-0,5 µg/l for TCAA in urine and 0,1-0,5 µg/m³ for THMs in exhaled alveolar air.

Performance characteristics:

Analytical reproducibility is generally good for THMs and TCAA in all matrices, with relative standard deviations of 2,8%-8,5%

Validation:

A number of standard methods for the measurement of DBPs is available from the USEPA

Confounding factors:

Age, sex, and occupational exposure may affect the observed DBP concentrations

Data interpretation

Concentrations reported in literature:

  • Concentrations in water (shower, drinking, pool) are generally in the range of 10-50 µg/l, in shower and pool air between 10 and 200 µg/m³.
  • Concentrations in exhaled air generally range from 4-54 µg/m³, plasma levels from 0,56-5,23 µg/l, and urine levels from 0-30 ng/min if excretion is followed in time

Dose-response/effect relationships:

No clear dose-response relationships are available

Time trend, geographical variation, susceptibel groups:

Children, frequent swimmers and occupationally exposed persons generally have higher risk of exposure

See also

Integrated Environmental Health Impact Assessment System
IEHIAS is a website developed by two large EU-funded projects Intarese and Heimtsa. The content from the original website was moved to Opasnet.
Topic Pages
Toolkit
Data

Boundaries · Population: age+sex 100m LAU2 Totals Age and gender · ExpoPlatform · Agriculture emissions · Climate · Soil: Degredation · Atlases: Geochemical Urban · SoDa · PVGIS · CORINE 2000 · Biomarkers: AP As BPA BFRs Cd Dioxins DBPs Fluorinated surfactants Pb Organochlorine insecticides OPs Parabens Phthalates PAHs PCBs · Health: Effects Statistics · CARE · IRTAD · Functions: Impact Exposure-response · Monetary values · Morbidity · Mortality: Database

Examples and case studies Defining question: Agriculture Waste Water · Defining stakeholders: Agriculture Waste Water · Engaging stakeholders: Water · Scenarios: Agriculture Crop CAP Crop allocation Energy crop · Scenario examples: Transport Waste SRES-population UVR and Cancer
Models and methods Ind. select · Mindmap · Diagr. tools · Scen. constr. · Focal sum · Land use · Visual. toolbox · SIENA: Simulator Data Description · Mass balance · Matrix · Princ. comp. · ADMS · CAR · CHIMERE · EcoSenseWeb · H2O Quality · EMF loss · Geomorf · UVR models · INDEX · RISK IAQ · CalTOX · PANGEA · dynamiCROP · IndusChemFate · Transport · PBPK Cd · PBTK dioxin · Exp. Response · Impact calc. · Aguila · Protocol elic. · Info value · DST metadata · E & H: Monitoring Frameworks · Integrated monitoring: Concepts Framework Methods Needs
Listings Health impacts of agricultural land use change · Health impacts of regulative policies on use of DBP in consumer products
Guidance System
The concept
Issue framing Formulating scenarios · Scenarios: Prescriptive Descriptive Predictive Probabilistic · Scoping · Building a conceptual model · Causal chain · Other frameworks · Selecting indicators
Design Learning · Accuracy · Complex exposures · Matching exposure and health · Info needs · Vulnerable groups · Values · Variation · Location · Resolution · Zone design · Timeframes · Justice · Screening · Estimation · Elicitation · Delphi · Extrapolation · Transferring results · Temporal extrapolation · Spatial extrapolation · Triangulation · Rapid modelling · Intake fraction · iF reading · Piloting · Example · Piloting data · Protocol development
Execution Causal chain · Contaminant sources · Disaggregation · Contaminant release · Transport and fate · Source attribution · Multimedia models · Exposure · Exposure modelling · Intake fraction · Exposure-to-intake · Internal dose · Exposure-response · Impact analysis · Monetisation · Monetary values · Uncertainty
Appraisal