Sources and source strengths of indoor air pollutants: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 1: | Line 1: | ||
== Utilization == | == Utilization == | ||
Information of the indoor source strengths is needed for modelling the indoor exposure levels when the indoor concentrations are not available by direct measurements. In this case the source strength i.e. emission rate can be used as input for the dispersion model that is used to calculate the indoor concentrations. | |||
== Limitations == | == Limitations == | ||
Source strengths data is difficult to find | Source strengths data is difficult to find. | ||
==Data== | ==Data== | ||
===Information sources=== | ===Information for indoor sources=== | ||
* [http://paginas.fe.up.pt/~envie/documents/finalreports/Final%20Reports%20Publishable/EnVIE%20WP3%20Final%20Report.pdf EnVIE report - Characterisation of spaces and sources] | * [http://paginas.fe.up.pt/~envie/documents/finalreports/Final%20Reports%20Publishable/EnVIE%20WP3%20Final%20Report.pdf EnVIE report - Characterisation of spaces and sources] | ||
===Information for indoor source strengths=== | |||
* [http://www.mech.uowm.gr/bumaproject/docs/guidance_site.pdf Emission rates of VOC's and Formaldehyde from 8 building materials] | |||
* [http://www.nrc-cnrc.gc.ca/obj/irc/doc/pubs/nrcc48314/nrcc48314.pdf Emission factor information for 90 VOC's from 69 building materials] | * [http://www.nrc-cnrc.gc.ca/obj/irc/doc/pubs/nrcc48314/nrcc48314.pdf Emission factor information for 90 VOC's from 69 building materials] | ||
Revision as of 08:27, 21 September 2010
Utilization
Information of the indoor source strengths is needed for modelling the indoor exposure levels when the indoor concentrations are not available by direct measurements. In this case the source strength i.e. emission rate can be used as input for the dispersion model that is used to calculate the indoor concentrations.
Limitations
Source strengths data is difficult to find.